THE USE OF SAFETY FULL BODY HARNESS (SFBH) SOCIALIZATION PT. HERVITAMA IINDONESIA

-HSE DEPT-

Working at height carries a very high risk, but to minimize the risk it can be reduced by using Personal Protective Equipment (PPE). Using Safety Full body harness (SFBH) is one of the PPE when working at a height of more than 1.8m. HSE Team in PT Hervitama Indonesia has socialized the Safety Full body harness (SFBH) to all employees on 27th October 2023. PT Hervitama Indonesia already has workers with High Building Workforce (TKBT (Tenaga Kerja Bangunan Tinggi) level 2 competency. Full body safety harnesses should be visually inspected before use, including other fall protection equipment such as lanyard dan lifeline.

Explanation by TKBT level 2 Competent Personnel regarding the Use of Safety Full Body Harness (SFBH)

 Safety Full Body Harness (SFBH) Check Before Carrying Out Work at Height

There are the following steps how to use Safety full body harness correctly :

    1.    Hold the D-Ring part of the full body harness, make sure there are no twisted webbings/straps and the chest strap is open

    2.    Hold the shoulder strap and insert your hands into the strap one by one. Make sure the D-Ring is at the back of your body, specifically at the back

    3.    Pull and tighten the leg strap, then attach it to the buckle. Adjust the circumference of the straps on your feet according to your comfort. Make sure the leg straps are not mixed up

    4.    Pair the chest strap and connect the buckle tab to the receptor until you hear a "click".

    5.    Make sure by hand that the full body harness is installed correctly and that there are no twisted straps. 

That's a glimpse of the use of a safety full body harness at PT. Hervitama Indonesia. Hopefully it can increase

insight to all colleagues.

#HSE Department